Copyright 2013 Baker Hughes Company.
English–DPI
620G Instruction Manual | 59
Set the Pressure Module to Zero
Figure
5
-
15: Example: Leak Test Results
Note:
To set the Leak Test options, a pressure module or external pressure sensor must be
correctly installed.
5.8 Set the Pressure Module to Zero
SETTINGS
> ZERO > ZERO
Use this option to write a new zero pressure value to the pressure module in use. The sensor zero
adjustment is permitted only if the adjustment is less than 10% FS positive pressure value of the
sensor.
Note:
To make a temporary adjustment for zero, use the Tare function.
Figure
5
-
16: Pressure Module Zero Example
