4. Installation and Configuration
4.1 Install Battery
We recommend that you install batteries in Ranger Pro devices in an indoors equipment room or
a similar environment. Do not replace batteries in a hazardous area.
WARNING
HAZARDOUS ENVIRONMENT
Risk of explosive atmosphere.
Do not install batteries in a hazardous area. Use only approved
battery types described in the Ranger Pro - Warning, Special
Conditions and Additional Information (126M6550) available
from
To maintain the device’s IP67 dust and water-resistant rating, assemble the device
carefully.
To install a battery in a Ranger Pro device:
1. Turn the e-module retaining ring counter-clockwise and
stop when resistance decreases. Place the device on a flat
surface. Use your index finger and apply firm pressure to
the top of the e-module. Use your other hand and continue
to unscrew and remove the retaining ring.
16/56
Ranger Pro Wireless Condition Monitoring Device
User Guide
125M6113 Rev. D
