Bake Max BMREF Titan Series, Operation Manual

Page: 5 / 10

Troubleshooting
Problem Possible Cause Remedy
No Refrigeration /
Compressor is Not
Running
Fuse blown or circuit breaker tripped. Replace fuse or reset circuit breaker
Power cord unplugged
Plug in power cord.
Thermostat set too high.
Set thermostat to lower
temperature.
Cabinet in defrost cycle. Wait for defrost cycle to finish
Cabinet
Temperature is too
Warm
Thermostat is set too high.
Set thermostat to lower
temperature.
Airflow is blocked.
Ensure there is at least 6" of space
available around the unit. Make
sure the ducts are not blocked.
Make sure the inside of the unit is
not over filled.
Low refrigerant levels.
Contact an authorized service
technician to check refrigerant
levels.
Door is slightly ajar.
Make sure door(s) is completely
closed.
External heat source.
Make sure the unit is away from
direct sunlight and other sources of
heat.
The following situations are not problems:
•
The murmur of water is heard when the refrigerator is working. This is normal as the coolant is
circulating in the system.
•
During high humidity days, condensation may be found on the outside of the refrigerator. This is not a
problem, this is caused by high ambient humidity. Simply use a cloth to wipe it.
Technical Specifications
•
BMREF28 Exterior Dimensions (WDH): 27.6” x 22.5” x 27”
•
BMREF35 Exterior Dimensions (WDH): 35.4” x 22.5” x 27”
•
Electrical: 120v / 15 Amps / 230 watts / 60Hz / 1Ph
•
Nema: 5-15P Plug
•
BMREF28 Net Weight: 141 lb / 64 kg
•
BMREF35 Net Weight: 156 lb / 71 kg