VISIT US AT BAKCOU.COM |
19
WHEELS AND TIRES
Check the tires for damage or a worn area. As a tire wears thin, it may become more susceptible to
puncture. If a cut goes all the way through the casing, or any casing thread shows through the tread,
replace the tire. Your bike shop should fix or replace loose spokes or spokes with damage.
FENDERS
When re-installing a fender, make sure you use the bolt(s) supplied with the eBike or fender assembly.
These bolts have specific sizes and locking capabilities. Failure to use these bolts may result in a loose or
detached fender contacting the tire causing an abrupt stop.
DERAILLEURS
Shift gears through all the sprocket combinations to make sure the derailleurs operate correctly and
smoothly, and the chain does not come off.
PEDALS
1. Wiggle the pedals to make sure they’re secure on the crank arms.
2. Rotate the pedals on the crank arm. If the pedals don’t rotate smoothly, see your bike shop to adjust
your pedal bearings.
3. If necessary, tighten your pedals. The right pedal is threaded in the usual direction.
The left pedal is left-hand threaded.
CHAIN
1. Check the chain for stiff link pins or wear and dirt.
2. Clean and lubricate the chain.
CABLES
1. Check the cables for problems: kinks, rust, broken
strands, or a frayed end. Cables should have an
end cap to prevent fraying.
2. Also check the cable housing for loose wire
strands, bent ends, cuts, and worn areas. If there
is a problem with a cable or housing, do not ride
your eBike. Unless you feel comfortable adjusting
your wire cables, take your eBike to your bike shop
for service.
ACCESSORIES
Check all accessories to make sure they’re correctly
and securely attached.
