Bajaj Pulsar F250 BS VI, Service Station Manual

Page: 82 / 83

82
For Mirror fitment SOP, refer “Headlamp / Speedometer / Harness
speedometer / Flap speedometer / Structure speedometer / Windshield /
Fairing structure Replacement” SOP given in electrical section of Pulsar F250
Service station manual available on e-ssm
Note : Mirror fitment for Pulsar F250 during PDI :
• Apply limaplex(HTX 3) grease(Refer spare parts catalogue for part number)
as shown in photograph before mirror fitment on vehicle.
Note : Leg guard fitment during PDI
Washer to be fitted on LH Leg guard
bottom mounting only.
Sequence seen from outer side:
Nut--
→
Leg guard---
→
Washer
Importance of washer : To avoid leg
guard fitment on vehicle in stressed
condition, this washer is to be fitted.
Torque value
Leg guard mounting Top bolt : 2
– 2.2
Kgf-m
Leg guard mounting bottom nut : 2
– 2.2
Kgf-m
Washer-KDAB0816 to
be fitted on LH Bottom
mounting
Nut
Leg guard