Speedometer Setting
8
Trip Meter Reset :
• Engine & Vehicle speed should be zero.
• Press Mode button for less than 2 sec. Mode gets
changed from Trip 1 – Trip 2 – Trip 1.
• Press Set button for more than 5 sec. Selected trip
mode is reset to zero. Other trip mode continues
updating.
Service Reminder Reset :
Bring the motorcycle at authorised BAL dealership
for re-setting the service reminder icon.
Clock Reset :
• Digital clock indicates time in HR & MM separated by
colon ‘:’
• It is 12 hour clock.
• Initially ‘:’ will be blinking
• Clock setting is possible in TRIP 1 mode only.
• Engine & Vehicle speed should be zero.
Clock
Service
Reminder
Trip Meter
1.
2.
3.
4.
5.
6.
Press mode & set
push button together
for more than 2 sec.
Press mode button for
less than 1 sec.
Press Mode button
continuously
Press Set button for less
than 1 sec.
Press mode & set
button together for
more than 2 sec.
Clock set mode is
selected & no editing
is carried out for
more than 5 sec.
‘:’ stops blinking
Digits starts blinking
Hour digits will
increases by one.
Speedy increase in Hour
digit
Increase in Minute digits
Set value will be saved
Exit clock setting mode
Digits stop blinking
‘:’ start blinking
Auto exit without saving
set value.
If engine/vehicle rpm is
given then system will
exit from clock set mode
without saving set value.
Press Set button
continuously
Speedy increase in
minute digit
7.