How to Ride Your Bike
1. Starting The Engine :
•
Turn ignition
switch
key to
‘ ’
position.
•
Put kill switch in
‘
’
position.
•
Confirm that transmission is in neutral
/
press the clutch lever if transmission is in
gear.
•
Keep throttle closed & press starter button,
•
Release starter button as soon as engine
starts.
2. Shifting Gears :
• Close throttle & depress the clutch lever.
• Shift into next higher or lower gear.
• Open the throttle and release the clutch
lever slowly and simultaneously.
3. Moving Off :
• Check that side stand is up.
• Depress the clutch lever.
st
• Shift into 1 gear.
• Open the throttle and release the clutch
lever slowly and simultaneously.
• As the clutch starts to engage, open the
throttle a little more, giving the engine just
enough rpm to keep it from stalling.
Caution :
Do not operate the starter
continuously for more than 5 seconds otherwise
battery would get discharged.
Note :
Incase of battery discharged condition, vehicle
will start by push start.
Wait 15 sec. between each operation of the starter
which will facilitate battery to recover.
Note :
The motorcycle is equipped with a Clutch
switch. This switch ensures that engine does not start if
the transmission is in gear. However, the engine can be
started in any gear if the clutch lever is pressed.
18
