Wheels - Tube Less Tyre
CAUTION :
Tubeless tyres are fitted in this
motorcycle. The walls of the tyres in
contact with the wheel rim should not be
damaged in any way during fitment /
removal of tyre. The tyre side walls in
contact with wheel rim seals air.
Wheel Puncture :
• Visit nearest known tubeless tyre repair
shop to remove puncture.
• Remove puncture by Filler or Plug method
only.
• Do not use patch method to remove
puncture of tubeless tyre.
Tyre Pressure :
Keep appropriate tyre pressure as mentioned
below to increase life of the tyre & for better
fuel consumption.
Note :
Incase the motorcycle is fitted with
imported tyres. compliance to respective indian
standard & central motor vehicle rules has been
ensured.
Front
25 PSI
Pulsar NS/AS
Rear (Solo)
28 PSI
Rear (with Pillion) 32 PSI
Front Wheel
Removing Front Wheel :
• Park vehicle perpendicular to the ground on
level surface.
• Remove speed sensor cable from case meter
assembly.
• Remove front axle nut & take out.
• Remove front wheel assembly from fork.
27
