19
Front Wheel Installation
Front Wheel Removal
•
Put the vehicle on stand.
•
Remove nuts securing wheel to the axle flange by using box spanner, while
loosening these nuts hold the wheel by hand or apply front brake.
•
Take out spring washers.
•
Pull the wheel from axle flange studs.
Front Wheel Installation
•
Reverse the above sequence.
•
Tighten the wheel nuts securely.
Rear Wheel Removal
The procedure for using the jack is as follows.
1) Loosen the wheel nuts (before putting the jack) with the vehicle in center
stand on position.
2) Put the jack by locating it on the rear shocker mounting boss & sliding it on
the ground by right hand, while pushing the grab up with the left hand from
the rear side of the vehicle. Ensure the jack is having all round contact with
the shocker mtg boss & is firm on the ground. Check for the gap between
front wheel & ground. Preferably front wheel should not touch the ground.
(Avoid using jack on roads having slope in forward direction)
Rear Wheel Installation