DAILY
- CHECK WATER LEVEL, REFILL IF NECESSARY TO
LINE ON SKIMMER PLATE.
- CHECK CHEMICAL READING AND ADJUST AS NEEDED.
- FOR PROPER FILTRATION, THE WATER SHOULD BE
CIRCULATING FOR AT LEAST FOUR HOURS A DAY.
WEEKLY -
WIPE DOWN THE WATER LINE.
- CHECK WATER FLOW AND CLEAN FILTER IF NECESSARY.
MONTHLY
- CLEAN FILTER CARTRIDGE.
- CLEAN THE INSULATED SPA COVER.
- TEST THE GFCI.
THREE MONTHS
- DRAIN THE SPA COMPLETELY, REFILL WITH WATER
AND REPLENISH CHEMICALS.
- WHILE THE SPA IS EMPTY, CLEAN WITH A NONABRASIVE
ACRYLIC CLEANER AND RINSE.
NOTE:
NEVER WAX THE SURFACE AS THE WATER WILL
DISSOLVE THE WAX AND CLOG THE FILTER.
SIX MONTHS:
- CLEAN, RESTAIN AND TREAT REDWOOD SKIRT.
SPA MAINTENANCE SCHEDULE
14
CLEANING THE FILTER:
Your Baja Spa comes complete with a 50 Sq. Ft. filter cartridge that is
designed to work under pressure. With normal use, this filter should be removed
a minimum of once every 30 days, or anytime you notice an appreciable decrease of the
flow from the spa jets. You should take time to clean the filter.
TO CLEAN THE FILTER:
1. TURN OFF THE POWER.
2. REMOVE THE COVER FROM THE FILTER UNIT.
3. OPEN AIR RELIEF PLUG.
4. DEPRESS LOCK SPRING ON FILTER AND REMOVE LOCK RING
BY TURNING COUNTERCLOCKWISE (LEFT).
5. REMOVE CARTRIDGE FROM THE FILTER HOUSING AND CLEAN
THOROUGHLY WITH THE PRESSURE SPRAY FROM A NOZZLE ON
A GARDEN HOSE.
6. REPLACE THE CLEANED FILTER AND TIGHTEN THE LOCKING RING.
7. TURN ON POWER.
8. WHEN THE WATER COMES OUT OF THE AIR RELIEF PLUG, CLOSE IT.
9. WHEN WATER IS FLOWING FULL, SET THERMOSTAT TO DESIRED
WATER TEMPERATURE.
Summary of Contents for sportub series
Page 8: ...7 ...
