background image

30

If the vehicle is not going to be used for a long period of time, for example, 

in winter time, some steps should be taken to prevent malfunction of and 

damage to its components which might be caused by long storage.  Before 

storing vehicle for a long period , proper maintenance should  be completed. 

1-   Change engine oil and clean oil filter.

2-   Drain off fuel from the fuel tank and carburetor.  Dispose of any drained 

fuel properly so as not to adversely affect the environment.

Attention:

If the storage will last for more than one month, fuel in the carburetor 

must be fully drained. This will help ensure that the carburetor maintains 

its normal performance after the storage.

3-  Remove spark plug and pour about 15-20ml (.5 - .68 oz.) of clean engine 

oil into cylinder.  Step down on the kick lever repetitively several times so 

as to have oil distributed all over inside engine components. 

Attention:
The ignition switch must be set to “ ” (OFF) position before stepping 

down on kick lever.  To protect ignition system from damage, the spark 

plug should be inserted in its cap and grounded.

4-   Wash the vehicle clean, wipe it dry and apply an even coat of wax to the 

painted surface and a coat of anti-rust oil on the chrome-plated surfaces.

5-   Inflate the tires as required and put the vehicle up on wooden blocks with 

the two wheels clearing the ground.

6-   Put the vehicle in a shady and cool place free from humidity and 

direct sunlight and cover it properly (not with plastic or other painted 

materials).  If there is a garage, store it within.

 

WARNING

Gasoline is flammable and may cause fire and even an explosion under certain conditions.  

Therefore, do not smoke, make a fire or have any fire around while draining off fuel.

Carburetor Drain 

screw

INSTRUCTIONS FOR STORAGE

Summary of Contents for DX110







































Reviews: