Baja
™
BA300
25
V I . B A S I C T R O U B L E S H O O T I N G
What if all the systems on my scooter seem to be dead?
Make certain that the key is in the “on” position.
Check that the batteries are fully charged.
Push in the main circuit breaker reset button. See II. “Your Scooter.”
Make certain that both battery harnesses and the front-to-rear harness are firmly connected.
Be sure the power down timer feature has not been activated. See IV. “Operation.”
What if my scooter does not move when I engage the thumb throttle control ?
When the manual freewheel lever is pushed forward, the brakes are disengaged and all power to the
motor/transaxle assembly is cut.
Push backward on the manual freewheel lever, turn the scooter off, then turn the scooter on to return
to normal scooter operation.
What if the main circuit breaker repeatedly trips?
If the main circuit breaker trips repeatedly, see your authorized dealer for service.
Charge the batteries more frequently. See IV. “Batteries and Charging.”
If the problem continues, have both of your scooter’s batteries load tested by your authorized dealer.
You may also perform the load test yourself. Battery load testers are available at most automotive
parts stores. Follow the directions supplied with the load tester.
See IV. “Batteries and Charging” or “Product Specifications Sheet” for information about your
scooter’s battery type.
What if the battery condition meter dips way down and the motor surges or hesitates when I
engage the thumb throttle control ?
Fully charge your scooter’s batteries. See IV. “Batteries and Charging.”
If you experience any problems with your scooter that you are not able to solve, immediately contact
your authorized dealer for information, maintenance, and service.
