25
This ATV has a 4 speed transmission with
Reverse
To shift vehicle in neutral, hold clutch lever in
and depress shift lever down until green neutral
indicator light illuminates. If vehicle is in reverse
the shift lever will need to be lifted once to shift
in neutral.
To shift vehicle through gears 1-4
1. Release throttle lever.
2. Shift into first gear by holding in clutch lever and lifting up once on
gear shift lever from neutral.
3. Open throttle gradually while releasing clutch lever. Once vehicle has
reached adequate speed, release throttle, pull in clutch and lift up again
on shift lever to shift into 2nd gear.
4. Open throttle gradually, repeat procedure for remaining gears.
Gear shift Lever
When slowing down or stopping, release throttle and apply brakes smoothly.
As the ATV slows down shift to a lower gear by pulling in clutch lever and
depressing the gear shift lever.
To shift vehicle into reverse.
1. While vehicle is stopped, pull in clutch lever and depress gear shift lever
until red reverse light indicator illuminates.
SHIFTING
CAUTION
Always close throttle and pull in clutch lever when shifting gears.
Failure to close throttle and pull in clutch lever while shifting gears could cause
damage to the engine and drive train.
CAUTION
Do not coast for long periods of time with the engine not running, and do not tow
the machine a long distance.
Even when the machine is in neutral, the gears are not properly lubricated unless
the engine is running, Towing the machine with the engine not running could
cause damage to the drive train.
Be sure to check for leaks in the gear case and keep oil up to the prescribed level.
RIDING YOUR ATV
4
3
2
1
N
R
Shift
Pattern
