23
BATTERY INSTALLATION (continued)
WARNING
NEVER REMOVE THE STRIP OF
CAPS NOR ADD ANY WATER OR
ELECTROLYTE.
How to Initially Charge the battery:
1. Connect the red positive (+) cable to the
red positive (+) pole of the battery.
(see figure 23)
2. Connect the black negative (-) cable to the
black negative (-) pole of the battery. (see
figure 24)
Note: The red positive (+) cable has a
larger diameter than the black negative (-)
cable.
3. Charging rate: Charge battery @ 0.7 Amps
for 5 ~ 10 hours.
• After charging is complete, press
down firmly with both hands to seat
the caps. (Do not pound or hammer.)
The battery is now sealed. (see figure
25)
• Locate battery compartment on
scooter. The battery compartment
is located under the floorboard. (see
figure 26)
• Attach red positive (+) cable to
positive (+) terminal on battery.
Then attach black negative (-) cable
to negative (-) terminal on battery.
Figure 23
Figure 24
Figure 25
Figure 26
