27
1.
Inspect front disk brake caliper (1) for leakage. If brake fluid leaks, the
safety of riding could be affected.
2. Inspect the brake hose (2) for cracks, and joints for leakage.
3. Check brake fluid level through the sight hole (3) in the brake fluid
reservoir, if level is at or below the LOWER mark, inspect brake pads for wear
and hydraulic system for leaks.
4. To add brake fluid, unscrew the 2 screws (4) on top of the bake fluid
reservoir and remove cap. Add DOT3 or DOT4 brake fluid. Do not mix brake
fluid types.
FRONT HYDRAULIC DISK BRAKE INSPECTION
Maintenance (continued)
BRAKES
ADJUSTMENT OF REAR BRAKE
1. To adjust rear brakes, turn rear adjusting nut (1) clockwise to increase
braking and counterclockwise to reduce braking.
2. Brake shoes should be replaced by a qualified service technician once
“Wear arrow” (2) reaches the “brake wear limit” .
1
2
3
4
1
2
