CHECKING THE OIL
Check engine oil each time prior to operating mini bike.
The oil level should be between upper and lower lines of oil gauge.
1. Set the Mini Bike on level ground, screw off the oil gage plug, wipe the oil gage rod clean and
then insert the gage plug into the crankcase again to check the oil level. There is no need to
screw the oil gage plug completely in the hole to check the oil.
2. Add lubricating oil up to the edge of the fuel plug.
3. Screw oil gage plug tightly.
Lubricating Oil Recommended
The lubricating oil is an important factor affecting the performance and service life of the engine.
Please refer to the chart for the correct grade of engine oil based on the environmental conditions
in your area. Do not use any other type of oil other than what is recommended in the chart. DO
NOT MIX OIL WITH THE GASOLINE.
.45L (.40qt) Oil
Lubricating oils of different
viscosity shall be employed
in different regions and at
different temperatures.
CAUTION
Never start the engine when there is
insufficient lubricating oil. Otherwise, it will
cause harm to the engine.
Oil dip stick
MACHINE
OIL
TEMP.
°C
°F
-30
-22
40
104
-20
-4
-10
14
0
32
10
50
20
68
30
86
0W-0 0W-50
5W-0 5W-50
0W-0
0W-0
INSPECTION AND MAINTENANCE