background image

59

BRAKES

The ATV has front drum brakes and a rear hydraulic disc brake.

 

WARNING

Failing to inspect and maintain your ATV’s brake system properly 

could be hazardous.

Improper maintenance of the brake increases your chance of having 

an accident.

Be sure to inspect the brake before riding according to the 

INSPECTION BEFORE RIDING section.  Always maintain your 

brakes according to the MAINTENANCE SCHEDULE.

 

WARNING

Operating the ATV in harsh conditions could be hazardous if you do 

not inspect brake wear often.

Operating in mud, water, sand, or other extreme conditions can 

cause accelerated brake wear.  This could lead to an accident.

If you operate your vehicle under these conditions, the brake must 

be inspected more often than recommended in the MAINTENANCE 

SCHEDULE.

FRONT BRAKE SHOE INSPECTION

Apply brake and inspect the position of the wear indicator. If indicator reaches 

wear limit mark, brake shoes must be replaced as a pair. 

NOTE: Have your local service center perform this task. Contact Baja 

Motorsports for your local service center.

Wear limit mark Wear indicator

Summary of Contents for BA49














































































Reviews: