IV. Operation guidance
1.
Boat installation and operation instruction
The boat functions are described as follows:
Installation instruction:
（
1
）
First open the left and right battery compartment covers, take two batteries
from the foam box, place them into the left and right battery compartment
of the boat respectively, fix the batteries by using the binding tapes,
connect the battery power lines at two ends respectively, and close the left
and right battery compartment cover.
（
2
）
Take out the boat antenna, fasten it clockwise, and fix it onto the boat
antenna seat.
（
3
）
If nesting is required on the left and right side of the middle compartment
respectively, insert the division plate of the middle compartment into the
front and rear slot of the compartment and fix it.
（
4
）
To take out the remote controller, place four AA-sized batteries, return all
White front light
Dismountable middle hopper
division plate
Battery compartment cover
Boat antenna
Power outlet of tail
compartment
Boat switch
Boat handle
Bait hopper
Charging port
Reserved antenna port of fish finder
Power alarm indicator
Reserved port of bait thrower
Blue rear light
Hook device
Propeller mesh enclosure