the rockers of the remote controllers to the origin and turn on the remote
controller switch. The power indicator of the remote controller will be on.
（
5
）
Close the left and right bottom compartment plate of the middle
compartment and feed the bait. When the middle compartment door is
remotely opened, the warning indicator will flicker.
（
6
）
After turning on the boat switch, the front and rear lamps of the boat will
flicker for three times. And then, test the functions of the remote controller.
If it is normal, place the boat into the water and start to use it.
（
7
）
If a rear explosion hook hopper is required, you can put explosive bait or
a hook in it, please note that the fish wires shall go through the reserved
wiring slot. Each time when the hopper door is opened, it is accompanied
by flickering of the indicator.
（
8
）
If a hook device is required, please operate the left rocker of the remote
controller downward to open the hook device and place the hanging ring
of the fish wires. When the hook device is remotely opened, the indicator
light will flicker.
（
9
）
After use, please close the switch of remote controller and boat switch.
2. Operation instruction of remote controller
The standard remote controller is operated as follows:
Operation instruction of standard remote controller:
Speed adjustment of bait thrower
Navigation deviation adjustment
Bait thrower switch
Lamp switch
Tail hanging compartment
Turn left
Turn right
Back right
Back left
Front
Back
Turn
left at
origin
Turn
right at
origin
Left
bait
hopper
Right
bait
hopper
Hook device
Reset button
Power indicator
Power switch
