THE MIA
®
SERIES CONTROLS
|
controls user guide
5
www.bainultra.com
Printed in canada. copyright © January 2010 Bainultra inc. All rights reserved. 45220001
some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
T
H
E
M
IA
®
S
E
R
IE
S
C
O
N
T
R
O
L
S
MIa
®
user guIde
the Mia
®
control panel comes standard with the
following baths:
• Azur
• Basa
tM
• Thalassa
•
increase or decrease air jet pressure
•
Activate
drying cycle
function
MAin Functions
on/oFF
on
Press the (on/off) key to start or to stop the tur-
bine and the Mia
®
control panel.
AdJust Air Jet Pressure
to ActivAte the drYing cYcle
Air jet pressure can be adjusted for maximum
comfort and a remarkably effective massage.
default pressure is set to 60%.
Increase or decrease the pressure
of the air jets
by repeatedly pressing the or keys until the
desired intensity is reached.
this function completely drains the conduits and
dries them for 90 seconds, regardless of whether
or not the system was activated. By eliminating any
water left in the conduits, the
drying cycle
ensures
perfect hygiene.
• No stagnant water
• No water left over from the previous bath
to activate the
drying cycle
, press
.
the operation will cease after 90 seconds. if you
do not activate the function, the drying process
will begin automatically after 15 minutes. if the
bath is used for soaking only, activate the drying cycle
manually by pressing
. You can use the
drying
cycle
function immediately after a hydro-thermo
massage
tM
session or whenever you wish.
note
• The heat for the heated backrest is controlled simultaneously with the intensity
of the jet pressure.
MiA
®
- user guide