I-E96-419A
v
Safety Summary
GENERAL
WARNINGS
Equipment Environment
All components, whether in transportation, operation or storage,
must be in a noncorrosive environment.
Electrical Shock Hazard During Maintenance
Disconnect power or take precautions to insure that contact with
energized parts is avoided when servicing.
Special Handling
This module uses Electrostatic Sensitive Devices (ESD).
SPECIFIC
WARNINGS
If input or output circuits are a shock hazard after disconnecting sys-
tem power at the power entry panel, then the door of the cabinet
containing these externally powered circuits must be marked with a
warning stating that multiple power sources exist. (p. 2-2)
SPECIFIC
CAUTIONS
It is strongly recommended that all power (cabinet, I/O, etc.) be
turned off before doing any termination unit wiring. Failure to do so
could result in equipment damage. Do not apply power until all con-
nections are verified. (p. 2-7, 4-1)
Remove modules from their assigned module mounting unit slots
before installing or removing a cable connected to that slot. Failure
to do so could result in damage to the module. (p. 4-1)
