Bailey infi 90 NIDI01, Instructions Manual

Page: 43 / 49

INTRODUCTION
I-E96-410A H - 1
APPENDIX H - IMHSS02 HYDRAULIC SERVO
SLAVE MODULE CONFIGURATION
INTRODUCTION
Figure H-1 shows the location of dipswitches used to configure
the IMHSS02 Hydraulic Servo Slave Module (HSS). Tables H-1
through H-7 give the dipswitch settings to configure the mod-
ule. This information is provided as a quick reference guide for
personnel installing the NIDI01 termination module. Configu-
ration consists of the setting the slave expander bus address
(dipswitch S1), controller gain (dipswitch S2), oscillator fre-
quency (dipswitch S3), oscillator amplitude (dipswitch S4),
LVDT excitation voltage (dipswitch S5), and demodulator gain
(dipswitch S6). Refer to the
IMHSS02 Hydraulic Servo Slave
Module instruction manual for detailed instructions.
Figure H-1. IMHSS02 Hydraulic Servo Slave Module
STATUS
LED
EXPANDER
BUS ADDRESS
CONTROLLER
GAIN
OSCILLATOR
FREQUENCY SELECT
CR2
CR3
S7
S4 S3
S5
P1
P3
P2
1 2 1 2
1 2 1 2
S2
1 2 3 4 5 6 7 8
OPEN
S1
1 2 3 4 5 6 7 8
OPEN
S6
1 2 3 4 5 6 78
OPEN
EMERGENCY/
MANUAL LED
DITHER
OSCILLATOR
FREQUENCY
DITHER
OSCILLATOR
CURRENT
AMPLITUDE
DEMODULATOR
GAIN
LVDT
PRIMARY
TP50195B