Bailey Infi 90 NIAI02, Instruction

Page: 12 / 25

INTRODUCTION
NOMENCLATURE
1 - 4 I-E96-434A
®
NOMENCLATURE
Table 1-3 contains the modules and equipment that can be
used with the NIAI02 module:
SPECIFICATIONS
Refer to Table 1-4 for the specifications of the NIAI02 Termina-
tion Unit.
Table 1-3. Nomenclature
Nomenclature Description
IMASM02 Thermocouple and Millivolt Input Slave Module
NIAC02 Thermocouple Calibration Module
NIAM02 Analog Master Termination Module
NKTM01 Cable, Termination Module (Ribbon)
NKTU02 Cable, Termination Module (PVC)
NKTU12 Cable, Termination Module (non-PVC)
258436A1 Cable retaining kit used when a round cable connects
to the TMU
NTMU01 Termination Mounting Unit (Rear Mount)
NTMU02 Termination Mounting Unit (Front Mount)
Table 1-4. Specifications
Property Characteristic/Value
Power Requirements 24 VDC at 10 mA.
Mounting Slides into a single slot in the termination mounting unit NTMU01/02.
Environmental
Electromagnetic/
Radio Frequency Interference No values available at this time. Keep cabinet doors closed. Do not use
communication equipment closer than 2 meters from the cabinet.
Ambient Temperature 0 to 70
o
C (32 to 158
o
F)
Relative Humidity 5% to 90%
±
5% up to 55
o
C (131
o
F) (noncondensing).
5% to 40%
±
5% up to 70
o
C (158
o
F) (noncondensing).
Atmospheric Pressure Sea level to 3 km (1.86 miles).
Air Quality Noncorrosive.
Cooling Requirements No cooling is necessary when used in Bailey Controls cabinets and
operated within stated limits.
Surge Protection Meets IEEE-472-1974 Surge Withstand Capability Test
1
.
Certification CSA certified for use as process control equipment in an ordinary (non-
hazardous) location.
NOTE: 1. Do not use the NKTM01 cable when compliance with IEEE-472-1974 is necessary.
Specifications are subject to change without notice.