INTRODUCTION
SPECIFICATIONS
I-E96-421A
1 - 5
Table 1-4. Specifications
Property
Characteristic/Value
Power Requirements
No power is required by the NIAC04 module.
Mounting
Slides into a single slot in the NTMU01 Termination Mounting Unit or
NTMU02 Termination Mounting Unit.
Environmental
Electromagnetic/ Radio
Frequency Interference
Ambient Temperature
Relative Humidity
Atmospheric Pressure
Air Quality
No values available at this time. Keep cabinet doors closed. Do not use
communication equipment closer than two meters from the cabinet.
0 to 70
°
C (32 to 158
°
F)
5% to 90% + 5% up to 55
°
C (131
°
F) (noncondensing)
5% to 40% + 5% up to 70
°
C (158
°
F) (noncondensing)
Sea level to 3 km (1.86 mi)
Noncorrosive
Cooling Requirements
No cooling is necessary when used in Bailey Controls cabinets and oper-
ated within stated limits.
Certification
CSA certified for use as process control equipment in an ordinary (nonhaz-
ardous) location.
Specifications subject to change without notice.
