Bailey Infi 90 NIAC03, Instruction

Page: 11 / 23

INTRODUCTION
GLOSSARY OF TERMS AND ABBREVIATIONS
1 - 4 I-E96-425A
®
GLOSSARY OF TERMS AND ABBREVIATIONS
Table 1-2 contains the glossary of terms for this manual.
NOMENCLATURE
Table 1-3 contains the modules and equipment that can be
used with the NIAC03 module:
SPECIFICATIONS
Table 1-4 contains the specifications for the NIAC03 module.
Table 1-2. Glossary of Terms and Abbreviations
Term Definition
Analog Continuously variable as opposed to discretely vari-
able.
RTD Resistance temperature detector. A sensing device
that changes resistance within a temperature range.
Slave Module One of a series of modules designed to perform high
or low level operations as directed by a master mod-
ule.
TMU Termination mounting unit. A card cage that provides
housing for INFI 90/Network 90
®
termination mod-
ules.
® .
® Network 90 is a registered trademark of Elsag Bailey Process Automation.
Table 1-3. Nomenclature
Nomenclature Description
IMASM03 Analog Slave Module
NKTM01 Cable, Termination Module (Ribbon)
NKTU02 Cable, Termination Module (PVC)
NKTU12 Cable, Termination Module (non-PVC)
NTMU01 Termination Mounting Unit (Rear Mount)
NTMU02 Termination Mounting Unit (Front Mount)
258436_1 Cable retaining kit used when a round cable con-
nects to the termination mounting unit.
Table 1-4. Specifications
Property Characteristic/Value
Power Requirements No power is required by the NIAC03 module.
Mounting Slides into a single slot in the NTMU01 Termination Mounting Unit or NTMU02
Termination Mounting Unit.