Bailey Infi 90 INPCI02, Instruction, Page: 23 / 53

INSTALLATION
INLIM03 SWITCH SETTINGS
3 - 6 I-E96-621A
®
Table 3-5. LIM Error Counter Addresses (SW1)
Counter
Address
Hex
Address
Switch Position
Description User Setting
1 2 3 4 5 6 7 8
64 40 0 1 0 0 0 0 0 0 Composite error count developed
every handshake period - the summa-
tion of all other error counters.
65 41 0 1 0 0 0 0 0 1 Unresolved NMI interrupts.
66 42 0 1 0 0 0 0 1 0 Unresolved IRQ interrupts.
67 43 0 1 0 0 0 0 1 1 Unresolved timer interrupts.
68 44 0 1 0 0 0 1 0 0 Queue overflow message losses.
69 45 0 1 0 0 0 1 0 1 Checksum failures.
70 46 0 1 0 0 0 1 1 0 Unresolved BTM IRQs.
71 47 0 1 0 0 0 1 1 1 Sequence errors.
72 48 0 1 0 0 1 0 0 0 Header CRC/OVRN errors.
73 49 0 1 0 0 1 0 0 1 Data CRC/OVRN errors.
74 4A 0 1 0 0 1 0 1 0 Messages developing data CRC
errors on route to destination.
75 4B 0 1 0 0 1 0 1 1 Transmission failures.
76 4C 0 1 0 0 1 1 0 0 Watchdog timer expirations.
77 4D 0 1 0 0 1 1 0 1 Data length errors.
78 4E 0 1 0 0 1 1 1 0 Loop - 1 Receive (RCV) failure.
79 4F 0 1 0 0 1 1 1 1 Loop - 2 Receive failures.
80 50 0 1 0 1 0 0 0 0 Loop - 1 Transmit (TX) failure.
81 51 0 1 0 1 0 0 0 1 Loop - 2 Transmit failures.
0 = Closed (on)
1 = Open (off)
Table 3-6. LIM Node Address Setting (SW2)
EXAMPLE SETTINGS
Address
Example
Switch Position
Binary Value 1
16
2
8 3
4 4
2 5
1
1 0 0 0 0 1
9 0 1 0 0 1
26 1 1 0 1 0
USER SETTING (SW2)
User
Address
Switch Position
Binary Value 1
16
2
8 3
4 4
2 5
1
0 = Closed (on)
1 = Open (off)