Bailey Infi 90 IMDSO15, Instruction

Page: 40 / 48

INTRODUCTION
WBPEEUI240754A0 A - 1
APPENDIX A - TERMINATION UNIT (NTDI01) CONFIGURATION
INTRODUCTION
The IMDSO15 digital output module can use a NTDI01 termi-
nation unit for termination. Dipshunts on the NTDI01 unit
configure the digital outputs that are sent to the process.
Refer to Table A-1 to determine the dipshunt strapping to con-
figure your application. Table A-2 provides the relay contact
assignments and Figure A-1 shows the location of those relay
contacts. Refer to this figure when connecting field wiring to
the NTDI01.
Table A-1. NTDI01 Dipshunt Configuration
Application/Signal Type Dipshunt Configuration
Field powered contact
Table A-2. Relay Contact
Assignment
Signal
NTDI01
Terminal No.
COM1 TB4-1
NO1 TB4-2
NC1 TB4-3
COM2 TB4-4
NO2 TB4-5
NC2 TB4-6
COM3 TB4-7
NO3 TB4-8
NC3 TB3-1
COM4 TB3-2
NO4 TB3-3
NC4 TB3-4
COM5 TB1-1
NO5 TB1-2
1 2 3 4
XU1-XU16
5 6 7 8
1 2 3 4
XU17
5 6 7 8