Bailey Infi 90 IMDSI12, Instruction

Page: 43 / 49

INTRODUCTION
WBPEEUI240752A0 B - 1
APPENDIX B - TERMINATION MODULE (NIDI01)
CONFIGURATION
INTRODUCTION
The IMDSI1 digital input module can use a NIDI01 for termi-
nation. Jumpers on the NIDI01 Termination Module configure
the digital inputs. The digital input module accepts inputs of
24 VDC, 48 VDC, 125 VDC and 120 VAC, depending on the
module selected. Refer to Table
1-3 for the variations available.
Refer to Table B-1 to determine the jumper settings to config-
ure your application. Figure B-1 shows the terminal assign-
ments for the digital input signals. Refer to this figure when
connecting field wiring to the NIDI01.
Table B-1. NIDI01 Jumper Configuration
Application/Signal
Type
Jumper Configuration
24 VDC, 48 VDC,
125 VDC, 120 VAC
TP27115A
J1-J10
1 2 3 4 5 6 8 7 9 10
Figure B-1. NIDI01 Terminal Assignments
1 2 3 5 6 7 8 9 10 11 12 13 14 15 16 17 18 4 19 20 21 22 23 24 25 26 27 28 29 30 31 32
TERMINAL NUMBER
NOT
USED
8B 8A 7B 7A 6B 6A 5B 5A 4B 4A 3B 3A 2B 2A 1B 1A 7B
8B 7A
8A
TP27159A