I-E96-225A
Preface
The IMCPM03 Communication Port Module connects the
CTT02 Configuration and Tuning Terminal, an engineering
work station (EWS) or a process control view (PCV
®
) work sta-
tion to a single INFI 90
®
Open process control unit (PCU). This
instruction explains how to install and use the IMCPM03 mod-
ule in the INFI 90 Open system. It contains sections that
describe module setup and operation. The appendices contain
information about the NIMP01 Termination Module and
NTMP01 Termination Unit.
This publication is for the use of technical personnel responsi-
ble for the installation, calibration, operation and maintenance
of the IMCPM03 Communication Port Module.
It is important for safety and operating reasons to first read
and understand this manual completely; do not install or com-
plete any tasks or procedures related to operation before read-
ing it.
® PCV and INFI 90 are registered trademarks of Elsag Bailey Process Automation.
