Bailey IMFEC11, Instruction

Page: 13 / 56

INTRODUCTION
HOW TO USE THIS INSTRUCTION
1 - 4 WBPEEUI240756A0
®
Repair and Replacement
Procedures
Explains how to replace a module needing repair.
Support Services Provides information about ordering parts from your local
Elsag Bailey sales office. It also explains other areas of support
that Elsag Bailey provides.
Appendix A Shows the dipshunt settings, terminal wiring for the NTAI05
analog input termination unit and the required cabling.
Appendix B Shows the dipswitch settings, terminal wiring for the NIAI04
analog input termination module and the required cabling.
Appendix C Shows the jumper settings, terminal wiring for the NTFB01
field bus termination unit and the required cabling.
HOW TO USE THIS INSTRUCTION
Read this instruction before placing the FEC module in opera-
tion. Refer to the sections in this list as needed for more
information.
1. Read Section 4 before placing the FEC module in operation.
2. Do the steps in Section 3 .
3. Refer to Section 5 for what to do if a problem occurs.
4. Refer to Section 6 for the scheduled steps needed to main-
tain the FEC module.
5. Refer to Section 7 for how to replace a module.
6. Use Section 8 for parts ordering information. This section
also tells of additional services that Elsag Bailey offers.
GLOSSARY OF TERMS AND ABBREVIATIONS
Table 1-1 contains those terms and abbreviations that are
unique to Elsag Bailey or have a definition that is different
from standard industry usage.
Table 1-1. Glossary of Terms and Abbreviations
Term Definition
Control module Directs field processes through an I/O module; the multifunction processor is an
example.
Field bus A signal line or set of signal lines used by an interface system to which many devices
are connected and over which messages are carried.
Function code An algorithm which manipulates specific functions. These functions are linked
together to form the control strategy.
I/O expander bus Parallel communication bus between the control and I/O modules.