Bailey Discovery 100, Owner'S Manual

Page: 71 / 101

4-31
Caravan Equipment
4
vii. Open the water fill door and add 50ml. of Aqua Rinse. This results in a better flush and improves
the hygiene of the toilet. Then fill the tank with fresh water using a jerry can or hose. Tank Capacity
is 7 litres (fig.7).
4.14.2 Operation
viii. Turn the bowl into most comfortable position (fig.8) or pressing down the flush button for the CWE
version (Senator only).
ix. Before using the toilet it is recommended to flush some water into the bowl by lifting and pressing
down the flush handle (fig.9).
x. After use open the blade, by pushing the blade-handle anticlockwise (fig.10).
xi. To flush, lift the flush handle and press it down (fig.11). After flushing, close the blade by pushing
the blade handle clockwise.
4.14.3 Emptying the holding tank
The holding tank capacity is approx. 17 litres and the tank should be emptied when the waste level
indicator lights up. The waste level indicator light lights up when the tank holds more than 15 litres of
waste.
▲
Do not allow the holding tank to become over filled.
xii. Open the access door and remove the holding tank. The holding tank can only be removed when
the valve-blade is closed (fig.12).
xiii. Carry the holding tank to a normal household type toilet or other authorised disposal point. Place
the holding tank in the vertical position and rotate the pour-out spout upwards (fig.13) .
xiv. Remove the measuring cap. Grasp the unit by upper carrying handle nearest pour-out spout.
Place other hand on upper rear hand grip so that the vent button can be depressed with the thumb
while emptying. This ensures a smooth outflow of the tank contents (fig.14).
Only depress the vent button when pouring out spout is pointed downwards.
Rinse the holding tank with clean water. For preparing to use again, see steps 1 to 7. Replace the
waste holding tank and lock the access door.
4.14.4 Cleaning and Maintenance
The largest seal, the seal for the ventilation and the seal for the cap are made from rubber. These seals
have to be cleaned regularly (once or twice a month, depending on the frequency of use). For best
results, use Thetford Bathroom Cleaner and Maintenance Spray.
Large seal: Remove the sliding cover and open the blade. Clean the seal with water and dry it, then
spray with Thetford Maintenance Spray.
Ventilation seal: Turn the automatic vent 60 o anti clockwise and take it out. Clean the seal with water
and dry it.
Cap seal: Clean the seal with water, dry it and use Thetford Maintenance Spray or Olive Oil.
Waste tank: Empty the tank and rinse it with clean water.