Parts:
Your new Professional Hi-Low Mat Table is shipped “knocked
down”, with all hardware and parts needed for final assembly.
Inspect the unit carefully, immediately upon removal from
packaging, to ensure that the unit is in good condition and all
materials are present before starting assembly.
Note:
Bailey
Manufacturing
Company
waives
any
responsibility for concealed freight damage not reported
within five (5) days of receiving shipment.
Refer to Product Warranty and Support Section of this
Manual for more information.
Read entire Product Manual before assembling or using this
product. Check Parts List below to verify receipt of all
material.
Your Mat Table is shipped in two (2) containers. The
following parts are packaged inside the larger crate:
•
(1) EA. Table Top & Frame Assembly
•
(4) EA. Skiis [each ski is attached to the Frame for
shipping]
The following parts are packaged in the smaller box:
•
(2) EA. Actuator
•
(1) EA. Actuator Control Box
•
(1) EA. Power Cord
•
(1) EA. Footswitch
•
(1) EA. Cable Lock
•
(16)EA. p/n 1503, 1/2-13 x 1 1/4” Hex Head Bolt
•
(16)EA. p/n 3598, 1/2” Lockwasher
•
(6) EA. p/n 3290, 3/4 x #10 Slotted Hex Tapping Screw
•
(2) EA. p/n 16057 Cable Strap
•
(1) EA Control Box Strap & (4) EA Self Tapping Screws
9600 Series Professional Hi-Low Mat Table
Page 5
BAILEY MANUFACTURING COMPANY
800-321-8372 • FAX: 800-224-5390
