9600 Series Professional Hi-Low Mat Table
Page 11
BAILEY MANUFACTURING COMPANY
800-321-8372 • FAX: 800-224-5390
Caution: All Model 9600 Series Professional Hi-Low Mat
Tables have an
intermittent [10%] duty cycle. For every
one (1) minute of continuous operation [approximately
one complete up/down cycle], the unit must stop for (9)
minutes. Failure to observe this duty cycle, or
overloading the table [which shortens the duty cycle]
may result in overheating and destruction of the
Actuators.
Cycle the Mat Table once with no load to check operation.
The Actuators should move in tandem, with a slight “hum”.
When operating the Mat Table with a load, it is normal for the
speed to slow and the “hum” to increase slightly.
Note: Inform and instruct all personnel regarding safe, proper
operation of this equipment and the duty cycle restrictions,
prior to placing the unit in service. This will ensure many
years of reliable operation.
Raised Rim Models Only:
Removable mats may be used with or without Tables. Raised
Rim models may be used without mats for activities that
might otherwise damage upholstery.
Troubleshooting:
Use the following guide for general diagnosis:
One or both Actuators do not operate:
•
Check power source and Power Cord for cuts or breaks.
•
Ensure Power Cord is fully inserted and locked into
Control Box.
•
Check Actuator Cable plug connection to Control Box.
Both Actuator connectors MUST be fully seated and
locked. Refer to Assembly section.
•
Inspect Footswitch or Handswitch for damage to cable or
switch mechanism.
[Continued on page 12]
