Bailey 2002 Series, Owner'S Manual

Page: 98 / 164

92
Chapter 4
CARAVAN EQUIPMENT
v. Slide holding tank into position through access door (fig.5). Never
force insertion as this can cause severe damage to the toilet.
vi. Make sure the holding tank is secured by the retaining clip (fig.6).
vii. Open the water fill door and add 50ml. of Aqua Rinse. This results in
a better flush and improves the hygiene of the toilet. Then fill the
tank with fresh water using a jerry can or hose. Tank Capacity is 7
litres (fig.7).
Operation
viii. Turn the bowl into most comfortable position (fig.8) or pressing down
the flush button for the CWE version (Senator only).
ix. Before using the toilet it is recommended to flush some water into
the bowl by lifting and pressing down the flush handle (fig.9).
x. After use open the blade, by pushing the blade-handle anticlockwise
(fig.10).
xi. To flush, lift the flush handle and press it down (fig.11). After flushing,
close the blade by pushing the blade handle clockwise.
Emptying the holding tank
The holding tank capacity is approx. 17 litres and the tank should be
emptied when the waste level indicator lights up. The waste level
indicator light lights up when the tank holds more than 15 litres of waste.
Caution: Do not allow the holding tank to become over filled.
xii. Open the access door and remove the holding tank. The holding
tank can only be removed when the valve-blade is closed (fig.12).
xiii. Carry the holding tank to a normal household type toilet or other
THE THETFORD CASSETTE C-200 CW / CWE
(continued)