Baileigh WR-32, Operator'S Manual

Page: 11 / 20

9
9
5. Mfr Param
•
STOP! These settings are not normally changed. DO NOT change these
settings unless asked to by an authorized Baileigh Industrial service technician.
5
Mfr Param
Password =
33587550
1. Velocity
1. Decel. Dist.
10.000mm
Spec.:
Decel. distance
Value: 10.000
Unit: mm
2. Approach Speed
400.000mm/min
Spec.:
Approach speed
Value: 400.000
Unit: mm/min
3. Run Acc.
500.000mm/s^2
Spec.:
The maximum linear
Acc. when machining
Value: 500.000
Unit: mm/s^2
4. Dry Run Acc.
500.000mm/s^2
Spec.:
The maximum linear
Acc. when
positioning
Value: 500.000
Unit: mm/s^2
5. Max.Turn Acc.
1000.000mm/s^2
Spec.:
Maximum. turn acc.
Value: 1000.000
Unit: mm/s^2
6. Jerk
150000.000mm/s^3
Spec.:
Jerk
Value: 150000.000
Unit: mm/s^3
7. Max Speed
*Max speed of axis
(mm/min)
X Axis: 10000.000
Y Axis: 10000.000
Z Axis: 5000.000
8. ShortSegSpdLmt
Yes
Spec.:
Enable short
Seg.SpdLmt
NOTICE: While some of these settings are intended to be adjusted by the operator to tune
the operation to the material and cut being performed, other settings are not to be changed
by the operator. If you are unsure of the effect a change to a setting will have on the
performance of the table, do not make the change.
DAMAGE DUE TO INCORRECT SETTING WILL NOT BE COVERED UNDER
WARRANTY.