17
17
ASSEMBLY AND SET UP
The Baileigh WP-750 can be floor or bench mounted. When mounting the weld positioner on a
bench, make sure it is adequately secured to avoid any possibility of tipping over with a load.
When loading the piece part onto the work table, follow these guidelines to avoid over turning
the positioner or over loading the gear train and motor.
•
Calculate the total weight of the piece part including all fixturing.
Note: The WP-750 has a load capacity of 770 lbs. (350 kg).
•
Locate the center of gravity of the piece part with all fixturing attached to the table.
•
Double check that all fixturing is securely attached to the table.
WARNING:
For your own safety, DO NOT connect the machine to the
power source until the machine is completely assembled and you read and
understand the entire instruction manual.
Summary of Contents for WP-750
Page 18: ...16 16 G H O I J K L M N...
