16
16
Item Part Name
Description
A
Foot Switch
Controls starting and stopping of table rotation
B
Electrical Cabinet
Houses the electrical operating components.
C
DC Drive Motor
Provides power to rotate the table
D
Table
Supports and secure piece part for welding. Rotates
when activated by the operator.
E
Table Rotate Gearbox
Used to support and rotate the table
F
Tilt Lock Handle
Loosens to allow the table to tilt from horizontal to
vertical or positions in between. Lock the handle to hold
the tilted position.
G
Carbon Contact Brush
Connect the welding ground cable to the carbon
contact brush cable to provide the ground path to the
table and thus the piece part during welding.
H
Fuse Holder
Holds 10A power fuse
J
Power Indicator Light
Lights RED when power switch is turned on
K
TEST/WELD Switch
2-position toggle switch
L
Power ON/OFF Switch
2-position toggle power switch
M
Speed Adjust Knob
Turning clockwise (
cw
) increases the rotation speed
N
FOR/STOP/REV. Switch
Used to change direction of table
O
AUTO/MAN. Switch
Changes mode of footswitch from auto to manual
