Baileigh IP-2011-HD, Operator'S Manual

Page: 27 / 48

24
24
LUBRICATION
This planer features factory-sealed bearings. Sealed bearing requires no lubrication during its
lifetime. Should a bearing fail, your planer will probably develop a noticeable rumble/vibration
which will increase when the machine is put under load.
Proper lubrication of other machine components is essential for long life and trouble-free
operation. Below is a list of components that require periodic lubrication. Schedules are based
on daily use. Adjust accordingly for your level of use.
Parts Lubrication Required
No. Position Grease Oil
1 Worm Gear Yes No
2 Gear Box No Yes
3 Chain Yes No
4 Chain Yes No
5 Chain Yes No
6 Bracket No Yes
7 Lead Screw Yes No
8 Column Clean & Oil No Yes
Table Elevation Screws
Use a light grease to lubricate the four elevation screws.
1. To access and lubricate the table elevation screws,
safely turn on power and raise the table all the way
up.
2. UNPLUG OR DISCONNECT PLANER FROM
POWER SOURCE AND LOCK OUT POWER.
3. Remove the front and rear cover below the table.
4. Use grease gun to pump 1 - 2 shots of grease into
the grease fitting attached on table elevation
columns.
Fig. 9