Baileigh HSP-60M-C, Operator'S Manual, Page: 21 / 48

18
18
6. Route the main cylinder hydraulic hoses (C) to the
hydraulic fitting and matching the letter labels (A
to A and B to B), one at a time, remove the plastic
caps and install the hoses to the fittings. Tighten
securely, however do not over tighten and distort
the swivel fitting collar.
7. Route the side cylinder hydraulic hoses (D) to the
hydraulic fitting and matching the letter labels (C
to C and D to D), one at a time, remove the plastic
caps and install the hoses to the fittings. Tighten
securely, however do not over tighten and distort
the swivel fitting collar.
8. Fill the tank with hydraulic oil. The press is
shipped without oil. Before starting up, the tank
needs to be filled with AW-32 hydraulic.
9. Remove the filler plug on top of the hydraulic tank.
10. Fill the tank with approximately 13gal. (50L) of
hydraulic oil.
11. Replace the filler plug.
IMPORTANT: NEVER run the motor
with a low oil level. This will damage the hydraulic
unit.
C
D