24
24
TROUBLESHOOTING
NOTES
FAULT
PROBABLE CAUSE
REMEDY
MOTOR DOES NOT
RUN
1. No power
2. Motor defective.
1. Check the power source.
2. Replace motor.
POOR TRACKING
1. Improper belt splice.
2. Worn wheel bearings
1. Check belt for irregular seam or shape.
2. Check all bearings for overheating or
damage. Replace worn or damaged
bearings.
CONTACT WHEEL
WEAR
1. Grinding in one area on belt.
2. Excessive grinding deposits on belt
and debris in machine.
Use entire work surface of belt whenever
possible.
2. Periodically clean interior of grinder.
SHORT BELT LIFE
1. Excessive grinding pressure.
1. Allow the belt to do the cutting. Excessive
pressure dulls the belt and removes the
grit from the belt.
WARNING:
Make sure the electrical disconnect is OFF before working on
the machine.
