Baileigh Industrial RDB-050, Operator'S Manual

Page: 15 / 40

12
12
ASSEMBLY AND SET UP
1. Unpack and remove the machine from the
crate it was shipped in.
2. Install the bender assembly (1, bottom
plate) (full ratchet plate assembly not shown
for clarity), onto the stand using the
fasteners (4 and 5) shown.
3. Remove the pivot bolt and install the anti-springback lever
into the latch plate and re-install and tighten the pivot bolt.
4. Connect the latch spring.
5. Read through the remainder of the manual and become
familiar with the die installation and settings as well as
normal operation.
6. Position the machine as desired following the installation
guidelines.
WARNING:
For your own safety, DO NOT connect the machine to the
power source until the machine is completely assembled and you read and
understand the entire instruction manual.