15
15
Item Description
A
Base with work surface and T-slots.
B
Work table with T-slots.
C
Chuck Guard with safety interlock.
D
Keyless Chuck.
E
Operator Controls
F
Removable Drive Cover. Provides access to the sheave to change the spindle speed.
G
Drive Motor.
H
Belt tension lock knobs. Two, one on each side.
I
Head to Column Clamping Bolt. Allows head to pivot on the Column.
WARNING:
Before operating the Baileigh Drill Press make sure it is
firmly bolted to the floor. If it tips over on you, it could cause severe injury or
death.
J
Depth Stop Lock Knob.
K
Quill Feed Handle.
L
Column with Table Elevation Rack.
M
Table Elevation Crank Handle. Elevation Clamping Knob located on opposite side.
N
Emergency Stop Button (Estop). In the event of incorrect operation or dangerous
conditions, the machine can be stopped immediately by pressing the
E-STOP
button.
Twist the emergency stop button clockwise (cw) to reset. Note: Resetting the E-Stop
will not start the machine.
O
Spindle Speed Chart. Use the chart as a guide for setting the spindle rpm for a drilling
operation. Note: This chart is a guide. Specific results will vary. Consult the drill
manufacturer for more detailed drilling information.
P
Green Start Button. Verify that the spindle and chuck are clear, the bit is secure and
held firm. Press to the motor and thus spindle rotation.
Q
Red Stop Button. Press to stop the motor and spindle.
