19
19
DUST COLLECTION
The
DG-500
has a dust chute with an outlet. To attach a dust collection system simply slide the
appropriate sized hose over the outlet and secure with a hose clamp. If your dust collection
hose is larger than the outlet on the
DG-500
, you may need to purchase an adapter from a local
retailer. The O.D. of the outlet is 1.61” (41mm).
MATERIAL SELECTION
When selecting materials keep these instructions in mind:
•
Material must be clean and dry. (without oil)
•
Material should have a smooth surface so it processes easily.
•
Dimensional properties of material must be consistent and not exceed the machine capacity
values.
•
Chemical structure of material must be consistent.
•
Buy certificated steel from the same vendor when possible.
CAUTION:
It must be determined by the customer that materials being
processed through the machine are NOT potentially hazardous to operator or
personnel working nearby.
Summary of Contents for DG-500
Page 23: ...21 21 PARTS IDENTIFICATION DRAWING...
Page 27: ...25 25 NOTES...
