Baileigh Industrial B8870, Operator'S Manual

Page: 13 / 32

11
11
E Lower Wheel Axle
F Lower Wheel
G Upper Wheel
H Upper Axle Latch
I Upper Wheel Axle
J Upper Wheel Bracket
K Frame
L Mounting Plates
Wheel Storage Bracket (Opposite side)
MATERIAL SELECTION
When selecting materials keep these instructions in mind:
•
Material must be clean and dry. (without oil)
•
Material should have a smooth surface so it processes easily.
• Dimensional properties of material must be consistent and not exceed the machine capacity
values.
• Chemical structure of material must be consistent.
•
Buy certificated steel from the same vendor when possible.
OPERATION
1. Clean the workpiece and wheels thoroughly, making sure any abrasive particles are
removed. Grit or dirt will mar your workpiece and even damage the wheels.
2. Dull sharp edges with a deburring tool arid put on a pair of leather gloves to prevent Injury to
your hands.
CAUTION:
It must be determined by the customer that materials being
processed through the machine are NOT potentially hazardous to operator or
personnel working nearby.
CAUTION:
Always wear proper eye protection with side shields, safety
footwear, and leather gloves to protect from burrs and sharp edges.
Keep hands and fingers clear of the rollers.
When handling large heavy sheets make sure they are properly supported.