Baileigh Industrial 1004180, Operator'S Manual, Page: 18 / 28

16
16
Star Pattern
The star pattern is useful for shaping round
workpieces.
Note: Avoid rolling directly over the
center of the workpiece, as too many passes could
overstretch the metal.
Staggered Stop Pattern
With this pattern, the track alternates randomly
between three different sets of lines.
Note: Marking the workpiece with a non-
permanent marker so you can see the outside, middle
and inside lines more clearly. Clean the wheels and
workpiece when you are finished.
1. From the starting point, roll the workpiece from the
outside line on one side to the outside line on the
opposite side.
2. Roll the workpiece from the middle line on one side
to the middle line on the opposite side.
3. Roll the workpiece from the inside line on one side
to the inside line on the opposite side.
4. Repeat Steps 1-3, as you move across the
workpiece, randomly alternating between outside,
middle, and inside lines.