Baier BDB 825, Translation Of The Original Instruction Manual

Page: 36 / 88

| 36 |
EN
3 Technical Characteristics
3.1 Technical specifications
Diamond drill type BDB 825
Manufacturer Maschinenfabrik OTTO BAIER GmbH
Operating voltage (V / Hz) ~230 / 50 / 60
Power consumption (watt) 1800
Protection class
/ I
No-load speed (min
-1
) 1800
Impact frequency (imp) 28000
Core drill bit diameter (mm) 60 – 200
Bit holder 1¼ UNC and G½
Weight (kg)
1)
5.2
Speed electronics Yes
Sound measurement
2)
K = 3 dB
L
pA
(sound pressure) dB (A) 92
L
WA
(sound power) dB (A) 99
Vibration measurement (m/s
2
)
3)
K = 1.5 m / s
2
Rear handle (5) 1 m / s
2
5.5
1)
Weight according to EPTA procedure 01/2003.
2)
Measured values for noise determined according to EN 60745. Wear hearing protection!
3)
Total vibration values (vector sum in three directions) determined according to EN 60745
The vibration emission values given in this instruction manual have been measured according to a method
of measurement standardised in EN 60745 and can be used for comparison between power tools. They
are also suitable for a preliminary estimate of the vibratory stresses.
The vibration emission values given represent the main applications of the power tool. If the power tool is
used for other applications, with different insert tools or are insufficiently serviced, this can significantly
increase the vibratory stresses over the whole work period. For a precise estimate of the vibration
emission values, the times during which the tool is switched off or is running but not actually in use should
also be taken into account. This can reduce the vibration stresses over the whole work period significantly.
WARNING
Health risk due to vibrations.
Î
Additional safety measures should be taken
to protect the user, e.g. wearing anti-vibration
protective gloves, correct maintenance
of power tools and insert tools, keeping
hands warm and good organisation of work
sequences.