8
To protect the connection points from weather and climate, clean each connection point
before installing cold shrink tubes, per the following figure.
1. Insert the cable into the cold shrink tube.
2. Tighten the connector.
3. Push the cold shrink tube to the top joint, and pull out the strip.
4. Ensure the cold shrink tube is tightly fitted with the connection.
For GPS antenna weatherproof, adopt all-weather electrical tape and mastic tape, per
the followed figure.
NOTE
: Make sure that the wrapping direction of the last layer is from the bottom up. The last layer
should be tight enough to keep it from cracking.
Install GPS Antenna
2.4
Read the following GPS antenna installation requirements before installing it on the eNB.
