INSTRUCTION MANUAL
3
This instruction manual must read by any person installing, operating, or servicing this
tool, with particular attention to the following safety rules.
1.
Do not use the intended application.
2.
Do not use equipment with this tool other than that recommended and supplied by
BAHCO.
5HVSRQVLELOLW\IRUDQ\PRGL¿FDWLRQXQGHUWDNHQE\WKHFXVWRPHUWRWKHWRROQRVH
assemblies, accessories or any equipment supplied by BAHCO or their representi-
ves, falls directly to the customer. BAHCO will be pleased to advice upon any
SURSRVHGPRGL¿FDWLRQ
4.
The tool must be maintained in safe working order at all times and examined at
UHJXODULQWHUYDOVIRUGDPDJHDQGIXQFWLRQE\TXDOL¿HGSHUVRQQHO'RQRWGLVPDQWOH
this tool without prior reference to the maintenance instructions.
5.
The precautions to be observed when using this tool must be explained by the
customer to all operators.
$OZD\VGLVFRQQHFWWKHDLUOLQHIURPWKHWRROLQOHWEHIRUHDWWHPSWLQJWRDGMXVW¿WRU
remove a nose assembly.
7.
Do not operate a tool that is directed towards any person(s) or the operator.
$OZD\VDGRSWD¿UPIRRWLQJRUDVWDEOHSRVLWLRQEHIRUHRSHUDWLQJWKHWRRO
7KHRSHUDWLQJSUHVVXUHVKDOOQRWH[FHHGEDUOELQð
10. Do not operate the tool without full nose equipment, oil plug and oil bleed screw in
place.
11.
When using the tool, safety glasses must be worn by both the operator and others
LQWKHYLFLQLW\WRSURWHFWDJDLQVWSLQHMHFWLRQVKRXOGDIDVWHQHUEHSODFHGÃPLGDLUµ
We recommend wearing gloves if the application has any sharp edges or corners.
12. Take care to avoid entangling of loose clothing, neck ties, long hair, cleaning rags
etc. in the moving parts ofthe tool, which should be kept clean and dry for the best
possible grip.
13. Excessive contact with hydraulic oil should be avoided. To minimise the possibility
of rashes, care should be taken to wash thoroughly.
Summary of Contents for XT912 Series
Page 9: ...INSTRUCTION MANUAL 9...
