Bahco BCL32G1, Manual

Page: 11 / 41

•
11
•
2. Unscrew the grease container from the gun.
3. Remove the cover from new grease cartridge and insert cartridge into the container tube.
Then remove the pull tab. See Fig. 2.
4.
Screw grease container ass’y into grease gun.
5. Release the piston rod from slot and push it all the way in.
6. This gun is ready to use. If your gun fails to work, it is due to air pocket in the grease
container ass’y. To remove the air, procedure as following:
Cartridge Loading
1. Continue to hold trigger switch meanwhile press/release air vent valve until trapped air is
removed.
2. If the gun still fails to work. Draw back the piston rod fully and
“Engaging” it with
plunger by rotating the plunger handle about 1/4 ~ 1/2 turns to set the position of key. See
Fig. 3.
3. Press/release air vent valve several times to release the air when push plunger handle.
4. Repeat item 1. procedure until trapped air is removed.
5.
“Disengaging” the plunger by rotating the plunger handle about 1/4 ~ 1/2 turns.
Push plunger rod all the way in.
Suction Filling (From Bulk Container)
1. Unscrew and dis-assemble tube cap from the container tube as Fig. 4.
Fig. 2
Pull Tab
Cover
New Grease Cartridge
Fig. 3
Disengaging Engaging
Plunge
Pistor Rod
Plunger Handle
Slot
Key
Key
Pistor Rod
Slot