Bahco BCL32DG1, Operating Instructions Manual

Page: 7 / 162

•
7
•
5. SPECIFIC SAFETY RULES AND/OR SYMBOLS
....................
Recycle
....................
Do not throw in Garbage
....................
Class II Tool
..................
Indoor use only
..................
Do not incinerate and put the battery
on fire
....................
Do not recharge if the battery is broken
or damaged
....................
Do not wet
................
Risk of electric shock
a.c.
.................
Alternating Current d.c.
...............
Direct Current
W
.......................
Watts V
........................
Volts
Hz
....................
Hertz
/min
............
Revolutions or Reciprocations per Minute
kg
....................
Kilograms mm
..............
Millimeter
kg-cm
......
Kilograms - Centimeter ft-lb
..............
Foot-Pound
6. FEATURES
1
3
2
1. LED
2. Collet Nut
3. Switch
7. OPERATING INSTRUCTIONS
Removing or Installing Battery Pack
1. Always switch off the machine before insertion or removal of the
battery pack.
2. To remove the battery pack, push the button on the battery pack and
pull the tool unit from the battery pack in the direction.
3. To insert the battery pack, align the tool unit slides with the battery
pack sliding groove and push the tool unit into place.
The tool unit can be slide into battery pack in two directions.
4. Do not force the battery pack in sliding it into tool unit. If the battery
pack does not slide in easily, it is not being inserted correctly.
Charging the Battery Pack
1. Plug the fast charger into the power source.
2. Slide the battery pack into the charger as the arrow direction shown
on the charger.
3. Push the battery pack into place and make sure the red light on the
charger is “ON”. The battery pack is now starting the charging cycle.
4. After finish the charging cycle, the light will turn into green.
The battery pack is now ready for use.
5. Your new battery pack is not charged. You need to charge it before use.
6. Always use the specified charger to charge the battery. When the
battery pack is inserted into the charger correctly, the red light will
come on and charging will begin.